| NX5500-2RD |
1U Rackmount Server
2 x Hot
Swap SATA or SAS HDD |
| Supermicro |
X8DTL - Default
X8DTL-3F
- SAS HDD Support |
| Chipset |
Intel® 5500 (Tylersburg) Chipset
ICH10R
+ IOH-24D |
| Socket |
LGA 1366 Socket |
Supported
CPU Series |
Intel®
Xeon® 5500 |
| System Bus |
QPI (up to 6.4 GT/s) |
| Memory Capacity |
Up to 24 GB of system memory
Three Channel
memory bus
6 DIMM
sockets |
| Memory Type |
DDR3 1333 / 1066 / 800MHz
ECC / ECC
Registered |
| DIMM Sizes |
1GB, 2GB, 4GB, 8GB |
| SATA |
6 x SATA ports
Intel ICH10R SATA (3.0Gbps) Controller
RAID 0, 1, 5, 10 support |
| SAS (Option) |
8 x SAS / SATA
6 x SATA
ports
LSI SAS1068E
RAID 0,
1, 10 support
(Optional:
AOC-IButton68) RAID 5 support
|
| IPMI (Option) |
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0
with virtual media over LAN and KVM-over-LAN support
Winbond®
WPCM450 BMC |
| Network Controllers |
2x Intel® 82574L Gigabit Ethernet Controllers
1x Realtek
RTL8201N PHY (dedicated IPMI) |
| Graphics |
Matrox G200eW 8 MB DDR2 |
| BIOS Type |
32Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features |
Plug and Play (PnP)
PCI 2.2
ACPI up
to 3.0
USB Keyboard
support |
|
|
| Form Factor |
1U Rackmount
|
| Dimensions |
Height: 1.75" - 444 (mm)
Widht:
16.9" - 430 (mm)
Depth:
26" - 660 (mm) |
| Aprx Weight |
45 Lbs |
| Internal |
2 x 3.5" SATA/SAS Hot-swap drive bay |
| External |
1 x 5.25" bay |
| Buttons |
Power On/Off
System Reset
Alarm Mute |
| LEDs |
Power Status
Hard Drive activity
Network actitvity
Fan Failure
System Overheat Warning |
| USB |
2 x USB ports |
| VGA |
1 x D-Sub 15-pin port |
| LAN |
2 x RJ45 LAN ports
|
| USB |
2 x USB ports |
| Keyboard / Mouse |
PS/2 keyboard and mouse ports |
| Serial Port |
1 x Fast UART 16550 serial port |
| Audio |
n/a |
| PCI-Express |
1 x PCI-e (x8) 2.0 slot (via raiser card) |
Profile |
Standard Profile |
Fans |
4 x 40mm fans mid chassis
1 x 40mm
fan rear chassis
CPU heatsink
and fan |
| Output Watts |
400 Watts |
| AC Input |
Full-range AC(100 - 240V), (60-50Hz) |
|
